You have no items in your shopping cart.

Attack Dogs (3 Miniatures)

Lead time est. 2 weeks
£9.00
SKU: ADOG-3
*

Current estimated lead time: 3 weeks

Please check the box to confirm you understand the following and have read the product description.

*
*
+ -

This is a 3D-printed resin product.

The product includes the following parts:

  • 1x Attack Dog in a running pose
  • 1x Attack Dog in a walking pose
  • 1x Attack Dog lying down

The Regiments scale dogs are ~18mm tall (to the tip of the ear), ~30.5mm long and ~8mm wide and fit on a 25mm base.
The Exo-Lord scale dogs are ~22.5mm tall (to the tip of the ear), ~38mm long and ~10mm wide and fit on a 32mm base.

 Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Products specifications
Attribute name Attribute value
Medium/ Material 3D Printed Photopolymer
Scale 28mm Heroic
Category Regiments
Inspiration Modern
Style / Theme PMC / Militia
Style / Theme Modern Military
Patreon Month 2023-09 Modern Post-Apocalypse 2
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

This is a 3D-printed resin product.

The product includes the following parts:

  • 1x Attack Dog in a running pose
  • 1x Attack Dog in a walking pose
  • 1x Attack Dog lying down

The Regiments scale dogs are ~18mm tall (to the tip of the ear), ~30.5mm long and ~8mm wide and fit on a 25mm base.
The Exo-Lord scale dogs are ~22.5mm tall (to the tip of the ear), ~38mm long and ~10mm wide and fit on a 32mm base.

 Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Products specifications
Attribute name Attribute value
Medium/ Material 3D Printed Photopolymer
Scale 28mm Heroic
Category Regiments
Inspiration Modern
Style / Theme PMC / Militia
Style / Theme Modern Military
Patreon Month 2023-09 Modern Post-Apocalypse 2
Product tags
Blog posts about this product
Conversion Corner - Liam's Fallout® inspired mini-diorama


Not too long ago, I was looking at some renders for models we had coming out in an upcoming Patreon Month bundle. And amongst those renders I saw a model that IMMEDIATELY made me think of a really cool idea for a mini diorama I could build up and paint and have on my hobby desk.

And that render was one of the “Fur Missiles” in our September Patreon bundle. (Now available as a Print-on-Demand item!)



As a big fan of the Fallout® video game franchise by Bethesda when I was younger I straight away pictured “Dogmeat” standing with one of our Exo Lords, models in our range that can look very Fallout® inspired depending on how you build them, and got straight to work trying to figure out all the pieces I would need to pull off the image in my head !


Going through our cast resin range, I managed to get the selection of parts down to this:
Exo-lord Character Pose Legs
Ranger Upgrade Torso
Ranger Mixed Arms
Ranger Helmets
Exorcist Carbine
Longbow Missile Launcher
Bayonets

 
Brotherhood of Steel inspired diorama - Resin parts


On top of those resin parts, I also needed from our Digital Forge:
Sitting down Dog
Exo-lord Dieselpunk unhelmeted head & heavy shoulder pad

Brotherhood of Steel inspired diorama - Digital Forge parts


Once I had gathered all of these parts, the craziness began !


Building the base character model was the simplest part of the diorama, it was just putting together the pieces from our resin range like a regular model and voila, I have my “survivor”. I made the interesting choice of putting the Heavy shoulder pads on upside down so they laid flat and longer, because the look it gave the model once they were on was VERY reminiscent of Power Armour from Fallout which is what I wanted to get as close to as possible. The next part took a little bit of clever kitbashing and converting to pull off, the survivor’s trusty Laser Rifle !


For this part, I started with the stock body of the gun, which I achieved simply by using a Longbow Missile Launcher and gluing on its front cap backwards to create a small indent at the front. Once that was done, I cut off a small piece of rounded resin and carefully glued it into the indent to create the “charge site” for shots to come out.


Now the weird part ! The underside of the rifle is quite iconic, and to achieve it as best I could I got the weirdest idea to cut down a Regiments Bayonet to look like the attachment point, and then use a piece of plastic rod to create the rail. I then took the Exorcist Carbine and chopped off the front grip area and glued it on underneath to add a grip to the body. The end result of my weird thought process left me with I thought a pretty cool looking “Laser Sniper Rifle”

 


Brotherhood of Steel inspired diorama - Laser Rifle WIP


I realised once I got to this point, there was a lip on the side that should totally have a power cell attached to it, and I found one of our Grenades was the perfect piece to just glue onto the side to achieve that look.


Brotherhood of Steel inspired diorama - Laser Rifle finished


With that, the only thing left to do was build the banner I could imagine him waving high as he approached his enemies, and then the base he would be standing on. For the original banner idea, I used some brass rod and one of our Ragged Banners, but this part of the model changed after I had finished the build ( Which you will see in the later photos )


And for the base, the survivor 100% had to be standing on a dusty highway because that is 100% the environment that he would be standing tall in. For that, I used a combination of sandpaper for the road surface, and some Vallejo Earth Texture paint to create the sandy desert offroad. And from there I added some little scatter pieces found on our Regiments leg sprues, as well as a piece of sprue bar to create a metal sign post and a stop sign I cut off from our or Renegade Command Arms sprue, and some Glass Bottles.


Brotherhood of Steel inspired diorama - Base


And with that ….. “The Survivor” was built


Brotherhood of Steel inspired diorama - Finished build

Brotherhood of Steel inspired diorama - Finished build

Brotherhood of Steel inspired diorama - Finished build


Now it was time to paint !!


As I started to paint the model, I began to feel like the banner wasn't “heroic” enough for him to bring into battle. So I asked fellow Staffer Attilla if they could design me a banner inspired by the Brotherhood of Steel© one but using our Logo in its place. Then after printing it up and using some PVA glue to turn it into a banner that looked like it had motion to it ….. The Brotherhood of the Forge Survivor was complete .


 Brotherhood of Steel inspired diorama - Painted model

Brotherhood of Steel inspired diorama - Painted model

Brotherhood of Steel inspired diorama - Painted model

 


Fallout® and all associated terms are Trademark and Copyright Bethesda Softworks LLC.

Comparisons and images are used to provide examples of possible conversions to inspire hobbyists own modelling projects. This feature is not associated with Bethesda Softworks LLC in any way.

 

Conversion Corner - Adam's Zona Alfa Stalkers


Just like Liam, I was also inspired by our most recent Patreon release - but by more than just the attack dogs, pretty much the whole release, in its entirety! (this might have something to do with the fact that I sculpted the weapons for these models!) 

It's been a while since I've done anything for Zona Alfa, and this was the perfect opportunity to revisit the Zone and bring back the weapons I used before, but this time as full digital sculpts rather than conversions.


As my faction I decided to go with Independents, as I imagine my crew as an ex-military unit that broke off and decided to try their luck on their own, freelancing in the Zone. As my starting crew, I hired my Veteran leader, another Veteran, two Hardened and two Rookie characters.


 The core build


I can't really leave anything unconverted, and looking at artwork for the S.T.A.L.K.E.R.® games gave me some good ideas. I knew this would be a mostly digital kitbash, so I loaded up Blender and started adding gear on top of our Gorka Suit bodies. 

 
Zona Alfa Stalkers Digital Kitbash


Most parts were more or less straightforward, just moving them into place and overlapping with the bodies, with the exception of the mask and the hoses.

The mask came from Undercover Operatives, but it had the headset attached, so I cut the back portion off using a cylinder and Boolean Difference, then cut the rest of the mask in half, and mirrored it to get rid of the microphone.

The hoses were part of the Biohazard Containment team - they didn't line up properly with the mask, so I had to use a creative combination of scaling, and the Grab Tool in sculpt mode to get them into place. Then I mirrored them and repeated the process for the other side. This was something I had to do individually for each body, as I did not want the combination to be in the exact same place on all the models.

The rest of the digital parts came from various sets: A head, holster and the crosses on the first aid packs from Undercover Operatives, the oxygen tank from Biohazard Containment, the scabbard from Jungle Fighters, the machete and flask from Wasteland Raiders

With the digital part of the work complete, I adjusted some supports for the modified parts and printed everything.

 


The Veterans - Leader and Sniper


Zona Alfa Stalkers Leader and Sniper


 To keep the crew uniform, I used my modified bodies with the Gorka Suit arms on all the models. This somewhat limited my posing options, but I could get around it by getting creative.

  • The Leader - starting skills: Leader & Scrounger, starting equipment: AS Val (Assault Rifle), Machete, Flash Bang, Hand Grenade, Binoculars, Gas Mask and two Med-Kits.

I opted not to represent any grenades on these models, as they can just be hidden in pouches or pockets. I wanted to model him with his weapon slung, binocular in hand, looking off into the distance. One of the open wrist arms worked for this pose, but it needed a hand, so I took a fitting one from the Tactical Hand Gestures sprue, glued it to the weapon and then to the arm. After I attached the arm to the body I finished the pose with adding a plasticard sling. His binocular came from the General in the D-Day bundle, mirrored.

  • The Sniper - starting skills: Steady Hands & Wrench, starting equipment: VSS Vintorez (Sniper Rifle), Machete, Smoke Grenade, Hand Grenade, Scope, Binoculars, Gas Mask and a Med-Kit.

More or less a straightforward build, the sneaky crouch-walk pose works great with the idea of a sniper stalking her prey. I usually try to go for a hooded head for my snipers, this time one from the Female Modern Hoodie heads sprue.

 
Zona Alfa Stalkers Leader and Sniper


The Hardened - Machine Gunner & Medic


Zona Alfa Stalkers Medic and Machine Gunner

  • The Machine Gunner - starting skill: Unload (what else?), starting equipment: PKM (Squad LMG), Machete, Satchel Charge, Hand grenade, Gas Mask, Med-Kit.

This model uses the PKM from the Booster Pack, but split from the original body and moved to a different pose. Only minor adjustments were needed for the supports. I finished this model with a resin Watch Cap head.

  • The Medic - starting skill: Bone Doc, starting equipment: AS Val (Assault Rifle), Machete, Hand Grenade, Flash Bang, Gas Mask, two Med-Kits.

She's almost entirely a digital build, the only "meat space" part was adding her printed arms to the body. Her head comes from the Undercover Operative Sergeant, and I made sure to add two of the first aid pouches representing her two Med-Kits.


Zona Alfa Stalkers Medic and Machine Gunner


The Rookies

 
Zona Alfa Stalkers Rookies


I imagine the newest members of the crew wouldn't be equipped with the "modern" Val or Vintorez, so I had to look for alternatives. I also wanted to keep the loadout to Eastern Bloc weapons, luckily our resin range offers a fair few of these!

  • Female Rookie - starting equipment: Skorpion (SMG), Machete, Molotov Cocktail, Hand Grenade, Gas Mask.

Her Skorpion is from Modern SMGs, and the machete held in a backwards grip is on the Scrap Melee Weapons sprue. I wanted to get a cool female head I never used before, that's when I realised that I have a leftover from my previous PMC Operative One conversion. When I was in the planning stage I decided that she'd be wielding her machete, so I did not add it into the scabbard when I was doing the digital build.

  • Male Rookie - starting equipment: Zastava M77 B1 (Battle Rifle), Machete, Molotov Cocktail, Hand Grenade, Gas Mask.

I wanted someone armed with something other than an Assault Rifle. I could've obviously used a regular AK-47, but why not go all the way? As I was researching Soviet era battle rifles for something I could add without designing a new weapon, I came across the Zastava M77 B1. It's a battle rifle, a modification of the AK, and something I could convert relatively easily, great! I cut the magazine and the front of the muzzle, added the mag and muzzle brake from a M16, removed the wire stock from the arm and glued the weapon on. With a little bit of work, I managed to make something closely resembling the real world weapon!


Zona Alfa Stalkers Rookies


 The Scientist & Attack Dog


Zona Alfa Stalkers Scientist and Dog


These two models are not technically part of the crew, but they fit right in!

  • I had an idea to make a character who's essentially useless in combat, but would work great as an objective or someone to be escorted in a scenario. The Scientist uses Civilian Hazmat Suit arms and body, with the oxygen tank removed to be swapped for an Alice Pack. His mask, filter pouch and Anomaly Detector came from Post-Apocalypse 2, while the hose is another piece from D-day, this time cut from the Captain. I finished the build with adding some extra equipment, in the form of a Duffle bag, held in his right hand.
  • Every team needs a trusty canine friend (as we don't have 'tacticool' feline friends yet)! The Attack Dog is almost unmodified, apart from the addition of goggles (doggles!) from the Wasteland Raiders asset library. The goggles almost fit perfectly, with only minor adjustments needed with the Grab tool in Blender Sculpt mode.


Zona Alfa Stalkers Scientist and Dog


 


The Bases


Zona Alfa Stalkers Bases


I wanted to convey an abandoned, overgrown urban decay feel with these bases, and the 25mm ones just don't give me enough space to really work on that, so I opted for 32mm bases. On top of these I added sidewalk pieces cut from the Modern Road bases, a few tree stumps, a fence made with aluminium mesh, a concrete bench from Urban Scatter with a piece of broken balsa wood as a slat, some broken bottles and even two rats.

Something was still missing, so I designed some radiation warning and town signs from the Chornobyl area. These are now available in the Post-Apocalypse 2 booster pack for everyone to print!

Prior to painting, I added Vallejo Brown Earth texture to all the open spaces. I was too excited to continue working on these, so I couldn't wait to get unpainted photos taken! After painting, I finished the bases with tufts and spiky shrubs from Gamers Grass, and Leaf Litter and Tall Shrubbery from Greenstuff World


Zona Alfa Stalkers Bases


The crew is now finished and ready for gaming if we ever get around to run a Zona Alfa campaign! I'll leave you with some painted photos - that's it for now, see y'all later!


Zona Alfa Painted Stalkers

Zona Alfa Painted Stalkers

Zona Alfa Painted Stalkers

Zona Alfa Painted Stalkers

Zona Alfa Painted Stalkers

Zona Alfa Painted Stalkers

Post-Apocalypse 2: Reclaim the Zone - 3D Printed Pre-Built Figures Giveaway!
This month's giveaway features pre-built 22 figures from our Post-Apocalypse 2: Reclaim the Zone Patreon month! 10 Gorka suited zone explorers with AS-VALs and VSS Vintorez rifles, 2 Gorka suits with PKP/PKM machine guns, 3 attack dogs, 4 "Leaper" mutants, and 3 mutant hounds, printed directly from our Digital Bundle in September!