PreviousRegiments Custom Heavy Weap...

NextRegiments Custom Command Sq...

Regiments Custom Infantry/Veteran Squad (10 Male Figures)

6 review(s) | Add your review

Price: $42.89

Old price: $54.65

SKU: RG-SQ-INF-10

Regiments Body Type: *

Separate Torso and Legs
One Piece Torso and Legs

Regiments One Piece Body: *

Show All Options

Boilersuit Renegade

Boilersuit Renegade
Robed Cultist

Robed Cultist
Gorka Suit

Gorka Suit

Regiments Compatibility Issues: *

I understand that Gothic Void Torsos are not compatible with backpacks and specialist weapons.

Regiments Compatibility Issues: *

I understand that Iron Corps Torsos are not compatible with backpacks and specialist weapons.

Regiments Compatibility Issues: *

I understand that there is only ONE Biohazard Suit torso on each sprue that can be used with specialist weapons and backpacks.

Dress Uniform Leg Posing - First Selection: *

Static
Advancing

Dress Uniform Leg Posing - Second Selection: *

Advancing
Static

Short Greatcoat Leg Posing - First Selection: *

Static
Advancing

Short Greatcoat Leg Posing - Second Selection: *

Advancing
Static

Long Greatcoat Leg Posing - First Selection: *

Static
Advancing

Long Greatcoat Leg Posing - Second Selection: *

Advancing
Static

Armoured Leg Posing -First Selection: *

Static
Advancing

Armoured Leg Posing - Second Selection: *

Advancing
Static

Fatigues Leg Posing - First Selection: *

Static
Advancing

Fatigues Leg Posing - Second Selection: *

Advancing
Static

PMC Leg Posing - First Selection: *

Static
Advancing

PMC Leg Posing - Second Selection: *

Advancing
Static

Militia Leg Posing - First Selection: *

Mixed

Militia Leg Posing - Second Selection: *

Mixed

Boilersuit Body Posing - First Selection: *

Static
Advancing

Boilersuit Body Posing - Second Selection: *

Advancing
Static

High-Tech Exoskeleton Leg Posing - First selection: *

Mixed

High-Tech Exoskeleton Leg Posing - Second selection: *

Mixed

Void Suit Leg Posing - First Selection: *

Mixed

Void Suit Leg Posing - Second Selection: *

Mixed

Puttee Wrap Leg Posing - First Selection: *

Mixed

Puttee Wrap Leg Posing - Second Selection: *

Mixed

Combat Trousers Leg Posing - First Selection: *

Mixed

Combat Trousers Leg Posing - Second Selection: *

Mixed

Grenadier Leg Posing - First Selection: *

Mixed

Grenadier Leg Posing - Second Selection: *

Mixed

Biohazard Suit Leg Posing - First Selection: *

Mixed

Biohazard Suit Leg Posing - Second Selection: *

Mixed

Raider Leg Posing: *

2 x Mixed Sprues

Robed Cultist Body Posing - First Selection: *

Mixed

Robed Cultist Body Posing - Second Selection: *

Mixed

High-Tech Recon Legs - First Selection: *

Mixed

High-Tech Recon Legs - Second Selection: *

Mixed

Gorka Suit Body Posing - First Selection: *

Mixed

Gorka Suit Body Posing - Second Selection: *

Mixed

SWAT Legs: *

Mixed x2

Infantry Weapon Attachment Type: *

Pistol Grip with Stock
Rifle Stock
Integrated into Arms

Regiments Infantry Weapons (Integrated Arms): *

Show All Options

AR-15 Arms

AR-15 Arms
Drop Trooper Arms with Carbines

Drop Trooper Arms with Carbines
Bullpup Rifle Arms (Mixed)

Bullpup Rifle Arms (Mixed)
P90 Arms

P90 Arms
KSG Arms

KSG Arms
Tavor Arms

Tavor Arms

Regiments Rifle Stock Arms Style: *

Show All Options

Fatigue

Fatigue
Void Suit

Void Suit
Dress Uniform

Dress Uniform

Armoured Arm Posing - First Selection: *

Shooting
Mixed

Armoured Arm Posing - Second Selection: *

Mixed
Shooting

Jungle Fighter Arm Posing - First Selection: *

Shooting
Mixed

Jungle Fighter Arm Posing - Second Selection: *

Mixed
Shooting

Militia (PMC) Arm Posing - First Selection: *

Shooting
Mixed

Militia (PMC) Arm Posing - Second Selection: *

Mixed
Shooting

Fatigue Arm Posing - First Selection: *

Shooting
Mixed

Fatigue Arm Posing - Second Selection: *

Mixed
Shooting

Renegade Arm Posing - First Selection: *

Shooting
Mixed

Renegade Arm Posing - Second Selection: *

Mixed
Shooting

Fatigue Stock Arm Posing Style - First Selection: *

Shooting
Mixed

Fatigue Stock Arm Posing Style - Second Selection: *

Mixed
Shooting

Robed Arm Posing - First Selection: *

Shooting
Mixed

Robed Arm Posing - Second Selection: *

Mixed
Shooting

Void Suit Arm Posing - First Selection: *

Mixed

Void Suit Arm Posing - Second Selection: *

Mixed

High-Tech Arm Posing - First Selection: *

Mixed

High-Tech Arm Posing - Second Selection: *

Mixed

Biohazard Suit Arm Posing - First Selection: *

Mixed

Biohazard Suit Arm Posing - Second Selection: *

Mixed

Gorka Suit Arm Posing - First Selection: *

Mixed

Gorka Suit Arm Posing - Second Selection: *

Mixed

SWAT Arms: *

Mixed x2

Regiments Support Weapon - First Selection:

Not Required
Infantry Weapon
Specialist Weapon
Man-Portable Heavy Weapon

Regiments Specialist Weapon: *

(Example photo shown)

Show All Options

Heavy Phase Lance [+$2.86]

Heavy Phase Lance [+$2.86]
Phase Lance [+$2.29]

Phase Lance [+$2.29]
Heavy Flame Thrower [+$2.86]

Heavy Flame Thrower [+$2.86]
Flame Thrower [+$2.29]

Flame Thrower [+$2.29]
Fusion Cannon [+$2.29]

Fusion Cannon [+$2.29]
Ion Rifle [+$2.29]

Ion Rifle [+$2.29]
Gauss Rifle + Power Plant [+$2.29]

Gauss Rifle + Power Plant [+$2.29]
Flechette Sniper Rifle + Power Pack [+$2.29]

Flechette Sniper Rifle + Power Pack [+$2.29]

Regiments Specialist Weapon Arm Style: *

Regiments Infantry Support Weapon: *

Regiments Man-Portable Heavy Weapon Arms: *

Regiments Support Weapon - Second Selection:

Not Required
Specialist Weapon
Man-Portable Heavy Weapon

Regiments Specialist Weapon: *

(Example photo shown)

Show All Options

Heavy Phase Lance [+$2.86]

Heavy Phase Lance [+$2.86]
Phase Lance [+$2.29]

Phase Lance [+$2.29]
Heavy Flame Thrower [+$2.86]

Heavy Flame Thrower [+$2.86]
Flame Thrower [+$2.29]

Flame Thrower [+$2.29]
Fusion Cannon [+$2.29]

Fusion Cannon [+$2.29]
Ion Rifle [+$2.29]

Ion Rifle [+$2.29]
Gauss Rifle + Power Plant [+$2.29]

Gauss Rifle + Power Plant [+$2.29]
Flechette Sniper Rifle + Power Pack [+$2.29]

Flechette Sniper Rifle + Power Pack [+$2.29]

Regiments Specialist Weapon Arm Style: *

Regiments Man-Portable Heavy Weapon Arms - Second Selection: *

Add Accessories and Equipment?: *

At a 20% discount!

No
Hell Yes!

Regiments Command Arms:

Plain 25mm base for each miniature: *

No Bases needed, I will supply my own.
PLAIN 25mm Base for each miniature [+$1.12]

Qty:

+ -

Overview
Product Safety
Specifications
Reviews

Combine parts from across our Regiments range to build your ultimate male custom infantry squad, and save up to 20% vs the cost of separate parts!

A Squad contains enough complete sprues to make up 10 complete figures, with some spare components left over.

The options menus are designed to be clear and easy to use, showing only the choices you need to make to complete your build.

The correct arms for your chosen infantry/support weapons will automatically be included.

You can also add a wide range of extra upgrade/equipment sprues at a 20% discount to the usual price.

Some important selection notes

Where it is not specified, we will automatically include the maximum number of different poses. In most cases, this is 10 poses but some products are only available with 5 poses, so a duplicate set is supplied.

The Tesla Disintegrator has an integrated scope and attached power feed which makes posing slightly more tricky, and the 'sling' arm pair on the mixed arms sprues do not work well without some converting.

The Gothic Void Torso does not work with backpacks or Specialist weapons, so select "Gothic Void (Plain Back)" if you want to use backpacks. For individual specialist weapons, we recommend you purchase an extra sprue of Gothic Void plain back torsos.

We regret that we are not able to make any "special request" changes to the sprues included with your squad. This is due to our move to a live stock system. If you need a different arrangement of parts, please purchase either multiple 5 figure squads, or separate sprues to complete your project.

If anything about the squad builder is unclear, please email support@anvilindustry.co.uk and we will do our best to respond as soon as possible.

This product is not a toy and is unsuitable for under 14's. They are supplied unpainted, and will require some preparation and assembly with super glue.

We recommend testing the poses and assembly of each miniature in the set before glueing in place. Some components can be left unglued, be magnetised or held in place with Blu-Tac or similar to allow weapon changes.

For further guidance please see the 'Working with Resin' guide at the bottom of the page.

Not a toy. Suitable for ages 14+

Not a toy.
Nije igračka.
Není to hračka.
Ikke et legetøj.
Geen speelgoed.
Ei ole mänguasi.
Ei lelu.
Pas un jouet.
Kein Spielzeug.
Όχι ένα παιχνίδι.
Nem játék.
Ní bréagán.
Non è un giocattolo.
Nav rotaļlieta.
Ne žaislas.
Mhux ġugarell.
Ikke et leketøy.
To nie jest zabawka.
Não é um brinquedo.
Nu o jucărie.
Ni igrača.
No es un juguete.
Inte en leksak.
Не е играчка.
Net e Spillsaach.

Please read the full product safety information and instructions here: https://anvilindustry.co.uk/product-info

General Safety Warnings

Anvil Industry products are miniature-scale collectibles, they are not toys, and are only suitable for ages 14+.

They should be kept out of reach of children aged 0-3 years as small parts may be sharp or a choking hazard.

All packaging should be kept out of reach of children aged 0-3 due to the risk of choking or suffocation.

Packaging should be disposed of in accordance with local legislation: Cardboard boxes and paper tape are recylable, void fill is startch based and compostable, gripseal bags are made from Polythene (LDPE) and are reusable and recyleable (please check with your local facility).

Product Materials

Note: Bundle products, like squad builders, may contain a mix of the following materials, please check the paperwork supplied with your order for the SKU of individual components.

Polyurethane Polymer (referred to as “Resin” or “Cast Resin”)

This material applies to all product SKUs beginning with "PU".

(Note: prior to 2025, sku's did not have the "PU" prefix.)

Products manufactured in the UK by Anvil Industry, using raw materials from the EU.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.

Photopolymer (referred to as “Resin” or “Printed Resin” or “3D Printed”)

This material applies to all SKUs beginning with “XX-3DP” where X's are numbers.

Products manufactured in the UK by Anvil Industry, using raw materials from China.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.

ABS Thermoplastic (referred to as “plastic”)

This material applies to all SKUs beginning with “BASE”.

Products manufactured in the EU by a supplier.

Appearance is black in colour, hard and slightly flexible.

Material is non-hazourdous at room temperature, as shipped to customer.

Material is recyclable along with other ABS plastics.

Products specifications

Attribute name	Attribute value
Scale	28mm Heroic
Category	Regiments

Existing reviews

Can't find any better than this!

From: Luke Date: 1/31/2023 2:43 PM

Seriously, the quality of the printing, the variety of parts available, the sheer, delicious grokkability of all the kits, it's frankly ridiculous that you get so much for such a decent price.

Was this review helpful? Yes No (0/0)

Great Models!

From: Chris Date: 5/7/2020 3:53 PM

The sprues came in excellent condition. Most of the sprues had minimal cleaning to none at all, a few needed some more attention (maybe an extra 5-10 minutes in total). The models went together great with super glue. Only (minor) issue I had was some of the torsos clipped at the waist where they met the legs. Easily solved with shaving a bit of plastic off at the waist. The poses of the arms & legs were dynamic and highly detailed. The guns & extra bits were also great! High detail and easy to work with. All the models easily fit into their push fit bases.

Was this review helpful? Yes No (3/0)

My parade guard army looks fantastic

From: Steve Date: 5/1/2020 9:48 AM

I love these guys. I've custom built 30 infantry as parade uniform space soldiers to start and I'm so looking forward to building up another 30 at least! And I've got plenty of extra torsos and heads for future modifications.

My only issue is that my painting skills don't do the models enough justice :P

Was this review helpful? Yes No (4/0)

Regiments Custom Infantry/Veteran squad

From: Jacob Date: 4/8/2020 8:54 AM

This is an excellent product, the models are highly detailed and just look fantastic.
I have a quite a few of these squads and would highly recommend them to anyone looking for this wide variety and choice of components

Was this review helpful? Yes No (2/0)

Replacment for Guardsmen

From: brandon Date: 3/12/2020 8:29 AM

I've recently finished a Certain "Robot army" from a Certain workshop of the games and decided to do a guards army was going to do kreig from the WORLD OF FORGE but felt like keeping my kidney. However i didn't want to do Cadian (generic), Catachan (just no) nor valhallens (space Russians!) so i went looking for unique infantry, and honestly it was hard, i tried using bolt action models but it looked odd in proportion to real guardsmen. but then i stumbled upon this holy grail why are custom regiment creators not more common.. i ended up creating ww2 era British soldiers and it was glorious fatigue webbing and field dress look absolutely marvellous. all details are well done and the resin is top notch they glue easily and paint well after priming, i even got a weapons team with a Maxim gun and i love it, i don't know if it was a mistake but i got extra parts that allowed me to make an extra soldier. i short i will be ordering more from this website GIB ME MORE JUICY MODELS!!

Was this review helpful? Yes No (6/0)

Custom regiments.

From: Roy Date: 12/10/2019 10:43 AM

Iv recently read three of the Warhammer Gaunt's Ghosts omnibus editions and been inspired to complete a unit of the Tanith 1st and only. Unfortunately Warhammer don't seem to do these figures and what is out on ebay is expensive and mainly private conversations. I came across Anvil Industry purely by chance. The'regiment custom infantry' was exactly what I needed. Iv used mostly jungle fighters parts and at the moment I'm making the individual figures. All parts are sharp, well detailed and fit together with very little cleaning needed. Im looking forward to painting them and in the meantime have ordered more 'parts'. I was also please with the delivery time. No waiting weeks and in one case months for figures as happens with many other firms out there.

Was this review helpful? Yes No (8/0)

Write your own review

Product can be reviewed only after purchasing it
Only registered users can write reviews

Review title: *

Review text: *

Rating:

Bad
Rating 1 Rating 2 Rating 3 Rating 4 Rating 5
Excellent

Combine parts from across our Regiments range to build your ultimate male custom infantry squad, and save up to 20% vs the cost of separate parts!

A Squad contains enough complete sprues to make up 10 complete figures, with some spare components left over.

The options menus are designed to be clear and easy to use, showing only the choices you need to make to complete your build.

The correct arms for your chosen infantry/support weapons will automatically be included.

You can also add a wide range of extra upgrade/equipment sprues at a 20% discount to the usual price.

Some important selection notes

If anything about the squad builder is unclear, please email support@anvilindustry.co.uk and we will do our best to respond as soon as possible.

This product is not a toy and is unsuitable for under 14's. They are supplied unpainted, and will require some preparation and assembly with super glue.

For further guidance please see the 'Working with Resin' guide at the bottom of the page.

Products specifications