You have no items in your shopping cart.

Sorry - this product is no longer available

Male Gothic Void Engineer - Character

€3.30
€11.00
SKU: OOP
Available in ... Never, sorry this has been withdrawn.
+ -

The set includes:

  • 1 "Modular Hero" - A complete miniature with interchangable parts

All of the Modular Hero parts are completely compatible with all of the standard infantry parts!

  • 2 x Heads. Unhelmeted male in flight cap, and a specialist spheroidal dome engineer's helmet
  • 1 x Unique pair of male legs in an advancing pose
  • 1 x Unique Gothic Void engineer's torso with extra pouches
  • 1 x Pair of male engineer arms holding a detonator and explosive charges

They are most compatible with our Regiments heads, arms, and legs, but can be used with any 28mm Heroic Scale miniatures.

This resin product is not a toy and is unsuitable for under 14's.

Our components are supplied unpainted, and will require some preparation, before assembly with super glue.

We recommend testing the poses and assembly of each miniature in the set before gluing in place. Some components can be left unglued, and be magnetised or held in place with Blu-Tac or similar adhesive putty, to allow weapon changes.

For further guidance please see the 'Working with Resin' guide at the bottom of the page.

Not a toy.Suitable for ages 14+

Not a toy.
Nije igračka.
Není to hračka.
Ikke et legetøj.
Geen speelgoed.
Ei ole mänguasi.
Ei lelu.
Pas un jouet.
Kein Spielzeug.
Όχι ένα παιχνίδι.
Nem játék.
Ní bréagán.
Non è un giocattolo.
Nav rotaļlieta.
Ne žaislas.
Mhux ġugarell.
Ikke et leketøy.
To nie jest zabawka.
Não é um brinquedo.
Nu o jucărie.
Ni igrača.
No es un juguete.
Inte en leksak.
Не е играчка.
Net e Spillsaach.

 

Product info


Please read the full product safety information and instructions here: https://anvilindustry.co.uk/product-info

 

 

General Safety Warnings


Anvil Industry products are miniature-scale collectibles, they are not toys, and are only suitable for ages 14+.

They should be kept out of reach of children aged 0-3 years as small parts may be sharp or a choking hazard.

All packaging should be kept out of reach of children aged 0-3 due to the risk of choking or suffocation.

Packaging should be disposed of in accordance with local legislation: Cardboard boxes and paper tape are recylable, void fill is startch based and compostable, gripseal bags are made from Polythene (LDPE) and are reusable and recyleable (please check with your local facility).


Product Materials

Note: Bundle products, like squad builders, may contain a mix of the following materials, please check the paperwork supplied with your order for the SKU of individual components.

Polyurethane Polymer (referred to as “Resin” or “Cast Resin”)

This material applies to all product SKUs beginning with "PU".

(Note: prior to 2025, sku's did not have the "PU" prefix.)

Products manufactured in the UK by Anvil Industry, using raw materials from the EU.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


Photopolymer (referred to as “Resin” or “Printed Resin” or “3D Printed”)

This material applies to all SKUs beginning with “XX-3DP” where X's are numbers.

Products manufactured in the UK by Anvil Industry, using raw materials from China.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


ABS Thermoplastic (referred to as “plastic”)

This material applies to all SKUs beginning with “BASE”.

Products manufactured in the EU by a supplier.

Appearance is black in colour, hard and slightly flexible.

Material is non-hazourdous at room temperature, as shipped to customer.

Material is recyclable along with other ABS plastics.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Sci-fi
Style / Theme Gothic
Gender Male
Medium/ Material Polyurethane Polymer - Cast Resin
Patreon Month 2020-12 Gothic Void
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

The set includes:

  • 1 "Modular Hero" - A complete miniature with interchangable parts

All of the Modular Hero parts are completely compatible with all of the standard infantry parts!

  • 2 x Heads. Unhelmeted male in flight cap, and a specialist spheroidal dome engineer's helmet
  • 1 x Unique pair of male legs in an advancing pose
  • 1 x Unique Gothic Void engineer's torso with extra pouches
  • 1 x Pair of male engineer arms holding a detonator and explosive charges

They are most compatible with our Regiments heads, arms, and legs, but can be used with any 28mm Heroic Scale miniatures.

This resin product is not a toy and is unsuitable for under 14's.

Our components are supplied unpainted, and will require some preparation, before assembly with super glue.

We recommend testing the poses and assembly of each miniature in the set before gluing in place. Some components can be left unglued, and be magnetised or held in place with Blu-Tac or similar adhesive putty, to allow weapon changes.

For further guidance please see the 'Working with Resin' guide at the bottom of the page.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Sci-fi
Style / Theme Gothic
Gender Male
Medium/ Material Polyurethane Polymer - Cast Resin
Patreon Month 2020-12 Gothic Void
Product tags
Blog posts about this product
Retro-Future Explorers & Hybrid Scavengers - Games Workshop®️ Imperial Navy Breachers Conversions
Staffer Adam is at the conversion desk again with some more kitbashing! This week he's turned his eyes on to the recent Navy Breacher kit, to see how well they can be converted with Anvil's resin parts!