You have no items in your shopping cart.

Female Special Forces Team (6 miniatures)

Lead time est. 2 weeks
$27.35
SKU: 00-3DP-MSF-F-SQD
*

At a 20% discount!

*

Current estimated lead time: 2 weeks

Please check the box to confirm you understand the following and have read the product description.

+ -

Speed and mobility is the focus for our special forces, with light plate carriers, lightweight FAST helmets, and simple, durable fatigues.

This is a 3D-printed resin product.

Kit includes:

  • 6 OpsCore FAST-style helmets with various accessories like NVGs/NODs, IR strobes, cloth covers etc
  • 2 Unhelmeted heads
  • 6 Modern Special Forces Torsos with light plate carriers
  • 6 pairs of Modern Special Forces legs
  • 5 pairs of Modern Special Forces Pistol Grip & Stock arms
  • 1 Modern Special Forces arm with slung SCAR-L rifle (right)
  • 2 Modern Special Forces Open Wrist Joint arms (left)

 

  • 5 SCAR-H Rifles
  • 1 SCAR-SSR Marksman Rifle
  • 1 P320 Pistol held in hand (left)
  • 2 Torches held in hand (left)
  • 2 Knives held in hand (left)
  • 1 Radio held in hand (left)

The neck joints of these models are compatible with our resin Regiments heads and helmets.
The arm joints of these models are compatible with our Female resin Regiments arms.
The waist joints of these models are compatible with our Female resin Regiments legs / Torsos.
The open wrist joint arms are compatible with our Regiments pistols, melee weapons and hands.

 Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Not a toy.Suitable for ages 14+

Not a toy.
Nije igračka.
Není to hračka.
Ikke et legetøj.
Geen speelgoed.
Ei ole mänguasi.
Ei lelu.
Pas un jouet.
Kein Spielzeug.
Όχι ένα παιχνίδι.
Nem játék.
Ní bréagán.
Non è un giocattolo.
Nav rotaļlieta.
Ne žaislas.
Mhux ġugarell.
Ikke et leketøy.
To nie jest zabawka.
Não é um brinquedo.
Nu o jucărie.
Ni igrača.
No es un juguete.
Inte en leksak.
Не е играчка.
Net e Spillsaach.

 

Product info


Please read the full product safety information and instructions here: https://anvilindustry.co.uk/product-info

 

 

General Safety Warnings


Anvil Industry products are miniature-scale collectibles, they are not toys, and are only suitable for ages 14+.

They should be kept out of reach of children aged 0-3 years as small parts may be sharp or a choking hazard.

All packaging should be kept out of reach of children aged 0-3 due to the risk of choking or suffocation.

Packaging should be disposed of in accordance with local legislation: Cardboard boxes and paper tape are recylable, void fill is startch based and compostable, gripseal bags are made from Polythene (LDPE) and are reusable and recyleable (please check with your local facility).


Product Materials

Note: Bundle products, like squad builders, may contain a mix of the following materials, please check the paperwork supplied with your order for the SKU of individual components.

Polyurethane Polymer (referred to as “Resin” or “Cast Resin”)

This material applies to all product SKUs beginning with "PU".

(Note: prior to 2025, sku's did not have the "PU" prefix.)

Products manufactured in the UK by Anvil Industry, using raw materials from the EU.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


Photopolymer (referred to as “Resin” or “Printed Resin” or “3D Printed”)

This material applies to all SKUs beginning with “XX-3DP” where X's are numbers.

Products manufactured in the UK by Anvil Industry, using raw materials from China.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


ABS Thermoplastic (referred to as “plastic”)

This material applies to all SKUs beginning with “BASE”.

Products manufactured in the EU by a supplier.

Appearance is black in colour, hard and slightly flexible.

Material is non-hazourdous at room temperature, as shipped to customer.

Material is recyclable along with other ABS plastics.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Modern
Medium/ Material 3D Printed Photopolymer
Style / Theme Modern Military
Patreon Month 2024-06 Modern / NATO Special Forces
Gender Female
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

Speed and mobility is the focus for our special forces, with light plate carriers, lightweight FAST helmets, and simple, durable fatigues.

This is a 3D-printed resin product.

Kit includes:

  • 6 OpsCore FAST-style helmets with various accessories like NVGs/NODs, IR strobes, cloth covers etc
  • 2 Unhelmeted heads
  • 6 Modern Special Forces Torsos with light plate carriers
  • 6 pairs of Modern Special Forces legs
  • 5 pairs of Modern Special Forces Pistol Grip & Stock arms
  • 1 Modern Special Forces arm with slung SCAR-L rifle (right)
  • 2 Modern Special Forces Open Wrist Joint arms (left)

 

  • 5 SCAR-H Rifles
  • 1 SCAR-SSR Marksman Rifle
  • 1 P320 Pistol held in hand (left)
  • 2 Torches held in hand (left)
  • 2 Knives held in hand (left)
  • 1 Radio held in hand (left)

The neck joints of these models are compatible with our resin Regiments heads and helmets.
The arm joints of these models are compatible with our Female resin Regiments arms.
The waist joints of these models are compatible with our Female resin Regiments legs / Torsos.
The open wrist joint arms are compatible with our Regiments pistols, melee weapons and hands.

 Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Modern
Medium/ Material 3D Printed Photopolymer
Style / Theme Modern Military
Patreon Month 2024-06 Modern / NATO Special Forces
Gender Female
Product tags