You have no items in your shopping cart.

Female Corporate Security Squad (5 miniatures)

€21.53
SKU: 00-3DP-F-CPF-SEC
*

Current estimated lead time: 2 weeks

Please check the box to confirm you understand the following and have read the product description.

*
Show All Options keyboard_arrow_down
  • Thor Taser Rifle
    Thor Taser Rifle
  • Laserbuss Rifle
    Laserbuss Rifle
  • Phase Carbines
    Phase Carbines
  • Trench Shotguns
    Trench Shotguns
  • Forge-Pattern Phase Rifles
    Forge-Pattern Phase Rifles
  • M1 Garands
    M1 Garands
  • Mosin Rifles
    Mosin Rifles
  • Bolt Action Rifle
    Bolt Action Rifle
  • PPSh-41 SMGs
    PPSh-41 SMGs
  • Tesla Coil
    Tesla Coil
  • Gothic Assault Rifle
    Gothic Assault Rifle
  • Arquebus
    Arquebus
  • Phase Arquebus
    Phase Arquebus
  • Crossbows
    Crossbows
  • Winchester Rail Rifles
    Winchester Rail Rifles
  • Nomad Jezail Rifles
    Nomad Jezail Rifles
  • Phase Musket
    Phase Musket
*
+ -

This is a 3D-printed resin product.

The product includes the following parts:

  • 6 x Corporate Security Helmets
  • 5 x Corporate Security Torsos
  • 5 x Corporate Security Legs
  • 5 pairs of Corporate Security Rifle Stock Arms
  • Your choice of Rifle Stock Infantry weapon

The neck joints of these models are compatible with our resin Regiments heads and helmets.
The arm joints of these models are compatible with our Female resin Regiments arms
The waist joints of these models are compatible with our Female resin Regiments legs / torsos.
The weapons / arms of these models are compatible with our resin Rifle Stock arms / weapons.

Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Not a toy.Suitable for ages 14+

Not a toy.
Nije igračka.
Není to hračka.
Ikke et legetøj.
Geen speelgoed.
Ei ole mänguasi.
Ei lelu.
Pas un jouet.
Kein Spielzeug.
Όχι ένα παιχνίδι.
Nem játék.
Ní bréagán.
Non è un giocattolo.
Nav rotaļlieta.
Ne žaislas.
Mhux ġugarell.
Ikke et leketøy.
To nie jest zabawka.
Não é um brinquedo.
Nu o jucărie.
Ni igrača.
No es un juguete.
Inte en leksak.
Не е играчка.
Net e Spillsaach.

 

Product info


Please read the full product safety information and instructions here: https://anvilindustry.co.uk/product-info

 

 

General Safety Warnings


Anvil Industry products are miniature-scale collectibles, they are not toys, and are only suitable for ages 14+.

They should be kept out of reach of children aged 0-3 years as small parts may be sharp or a choking hazard.

All packaging should be kept out of reach of children aged 0-3 due to the risk of choking or suffocation.

Packaging should be disposed of in accordance with local legislation: Cardboard boxes and paper tape are recylable, void fill is startch based and compostable, gripseal bags are made from Polythene (LDPE) and are reusable and recyleable (please check with your local facility).


Product Materials

Note: Bundle products, like squad builders, may contain a mix of the following materials, please check the paperwork supplied with your order for the SKU of individual components.

Polyurethane Polymer (referred to as “Resin” or “Cast Resin”)

This material applies to all product SKUs beginning with "PU".

(Note: prior to 2025, sku's did not have the "PU" prefix.)

Products manufactured in the UK by Anvil Industry, using raw materials from the EU.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


Photopolymer (referred to as “Resin” or “Printed Resin” or “3D Printed”)

This material applies to all SKUs beginning with “XX-3DP” where X's are numbers.

Products manufactured in the UK by Anvil Industry, using raw materials from China.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


ABS Thermoplastic (referred to as “plastic”)

This material applies to all SKUs beginning with “BASE”.

Products manufactured in the EU by a supplier.

Appearance is black in colour, hard and slightly flexible.

Material is non-hazourdous at room temperature, as shipped to customer.

Material is recyclable along with other ABS plastics.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Sci-fi
Style / Theme Cyberpunk
Medium/ Material 3D Printed Photopolymer
Gender Female
Weapon Attachment Type Rifle Stock
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

This is a 3D-printed resin product.

The product includes the following parts:

  • 6 x Corporate Security Helmets
  • 5 x Corporate Security Torsos
  • 5 x Corporate Security Legs
  • 5 pairs of Corporate Security Rifle Stock Arms
  • Your choice of Rifle Stock Infantry weapon

The neck joints of these models are compatible with our resin Regiments heads and helmets.
The arm joints of these models are compatible with our Female resin Regiments arms
The waist joints of these models are compatible with our Female resin Regiments legs / torsos.
The weapons / arms of these models are compatible with our resin Rifle Stock arms / weapons.

Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Sci-fi
Style / Theme Cyberpunk
Medium/ Material 3D Printed Photopolymer
Gender Female
Weapon Attachment Type Rifle Stock
Product tags