You have no items in your shopping cart.

Male Fatigue Arms - Mixed (5) [Pistol Grip]

€5.24
SKU: 07-B-4
In stock
+ -

This product is Five Pairs of Fatigue Arms, with five unique mixed poses to add variety to a unit.

The sprue also includes a number of spare hands for use in conversions.

They are most compatible with our Regiments torsos and guns, but can be used with many 28mm Heroic Scale miniatures.

Each Arm has an approx 7.5mm wide internal space for the torso. 

This product is not a toy and is unsuitable for under 14's. They are supplied unpainted, and will require some preparation and assembly with super glue.

We recommend testing the poses and assembly of each miniature in the set before glueing in place. Some components can be left unglued, be magnetised or held in place with Blu-Tac or similar to allow weapon changes.

For further guidance please see the "Working with Resin" guide at the bottom of the page.

Not a toy.

Not a toy.
Nije igračka.
Není to hračka.
Ikke et legetøj.
Geen speelgoed.
Ei ole mänguasi.
Ei lelu.
Pas un jouet.
Kein Spielzeug.
Όχι ένα παιχνίδι.
Nem játék.
Ní bréagán.
Non è un giocattolo.
Nav rotaļlieta.
Ne žaislas.
Mhux ġugarell.
Ikke et leketøy.
To nie jest zabawka.
Não é um brinquedo.
Nu o jucărie.
Ni igrača.
No es un juguete.
Inte en leksak.
Не е играчка.
Net e Spillsaach.

 

Product info


Please read the full product safety information and instructions here: https://anvilindustry.co.uk/product-info

 

 

General Safety Warnings


Anvil Industry products are miniature-scale collectibles, they are not toys, and are only suitable for adults.

They should be kept out of reach of children as small parts may be sharp or a choking hazard.

All packaging should be kept out of reach of children due to the risk of choking or suffocation.

Packaging should be disposed of in accordance with local legislation: Cardboard boxes and paper tape are recylable, void fill is startch based and compostable, gripseal bags are made from Polythene (LDPE) and are reusable and recyleable (please check with your local facility).


Product Materials

 

Polyurethane Polymer (referred to as “Resin” or “Cast Resin”)

This material applies to all product SKUs, excluding the ones listed here which are made of other materials (16-C-10 - Magnet Pack, 09-C-7 - Regiments Magnet Pack, All SKUs beginning with “BASE”, All SKUs beginning with “00-3DP”, All SKU's begining with "DF" or "ADF").

Products manufactured in the UK by Anvil Industry, using raw materials from the EU.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


Photopolymer (referred to as “Resin” or “Printed Resin” or “3D Printed”)

This material applies to all SKUs beginning with “00-3DP”.

Products manufactured in the UK by Anvil Industry, using raw materials from China.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


ABS Thermoplastic (referred to as “plastic”)

This material applies to all SKUs beginning with “BASE”.

Products manufactured in the EU by a supplier.

Appearance is black in colour, hard and slightly flexible.

Material is non-hazourdous at room temperature, as shipped to customer.

Material is recyclable along with other ABS plastics.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Modern
Style / Theme Fatigue
Gender Male
Weapon Attachment Type Pistol Grip With Stock
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

This product is Five Pairs of Fatigue Arms, with five unique mixed poses to add variety to a unit.

The sprue also includes a number of spare hands for use in conversions.

They are most compatible with our Regiments torsos and guns, but can be used with many 28mm Heroic Scale miniatures.

Each Arm has an approx 7.5mm wide internal space for the torso. 

This product is not a toy and is unsuitable for under 14's. They are supplied unpainted, and will require some preparation and assembly with super glue.

We recommend testing the poses and assembly of each miniature in the set before glueing in place. Some components can be left unglued, be magnetised or held in place with Blu-Tac or similar to allow weapon changes.

For further guidance please see the "Working with Resin" guide at the bottom of the page.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Modern
Style / Theme Fatigue
Gender Male
Weapon Attachment Type Pistol Grip With Stock
Product tags
Blog posts about this product
Conversion Corner - Dan's Majestic 13 - 1940's Team
Staffer Dan makes a Majestic 13 team with inspiration from the 1940's Roswell Incident!