You have no items in your shopping cart.

The Arch Angel (1 miniature) - Daughters of the Burning Rose

Lead time est. 2 weeks
£25.00
SKU: 00-3DP-FBR-TAA
*

Current estimated lead time: 4 weeks

Please check the box to confirm you understand the following and have read the product description.

+ -

The Archangel - the final and highest possible rank in the Order of the Burning Rose. On the battlefield the archangel is righteous fury made manifest. Borne on four enormous feathered wings, and wielding either a flaming holy avenger's sword, or heart piercing spear.

This is a 3D-printed resin product.

 

Kit includes:

  • 1 Arch Angel Upper Body
  • 1 Arch Angel Legs
  • 1 Arch Angel Left Arm
  • 1 Arch Angel Right Arm [Open Wrist]
  • 1 Arch Angel Shoulder Pad
  • 1 Arch Angel Backpack
  • 4 Arch Angel Wings

 

  • 1 Arch Angel Flaming Sword held in hand (right) [Open Wrist]
  • 1 pair of Arch Angel Arms with Spear

One of the Characters from our Daughters of the Burning Rose range of gothic medieval-themed warrior women, suitable for use in sci-fi and fantasy tabletop gaming and TTRPG.

 

 Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Not a toy.

Not a toy.
Nije igračka.
Není to hračka.
Ikke et legetøj.
Geen speelgoed.
Ei ole mänguasi.
Ei lelu.
Pas un jouet.
Kein Spielzeug.
Όχι ένα παιχνίδι.
Nem játék.
Ní bréagán.
Non è un giocattolo.
Nav rotaļlieta.
Ne žaislas.
Mhux ġugarell.
Ikke et leketøy.
To nie jest zabawka.
Não é um brinquedo.
Nu o jucărie.
Ni igrača.
No es un juguete.
Inte en leksak.
Не е играчка.
Net e Spillsaach.

 

Product info


Please read the full product safety information and instructions here: https://anvilindustry.co.uk/product-info

 

 

General Safety Warnings


Anvil Industry products are miniature-scale collectibles, they are not toys, and are only suitable for adults.

They should be kept out of reach of children as small parts may be sharp or a choking hazard.

All packaging should be kept out of reach of children due to the risk of choking or suffocation.

Packaging should be disposed of in accordance with local legislation: Cardboard boxes and paper tape are recylable, void fill is startch based and compostable, gripseal bags are made from Polythene (LDPE) and are reusable and recyleable (please check with your local facility).


Product Materials

 

Polyurethane Polymer (referred to as “Resin” or “Cast Resin”)

This material applies to all product SKUs, excluding the ones listed here which are made of other materials (16-C-10 - Magnet Pack, 09-C-7 - Regiments Magnet Pack, All SKUs beginning with “BASE”, All SKUs beginning with “00-3DP”, All SKU's begining with "DF" or "ADF").

Products manufactured in the UK by Anvil Industry, using raw materials from the EU.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


Photopolymer (referred to as “Resin” or “Printed Resin” or “3D Printed”)

This material applies to all SKUs beginning with “00-3DP”.

Products manufactured in the UK by Anvil Industry, using raw materials from China.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


ABS Thermoplastic (referred to as “plastic”)

This material applies to all SKUs beginning with “BASE”.

Products manufactured in the EU by a supplier.

Appearance is black in colour, hard and slightly flexible.

Material is non-hazourdous at room temperature, as shipped to customer.

Material is recyclable along with other ABS plastics.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Fantasy
Medium/ Material 3D Printed Photopolymer
Style / Theme Renaissance
Gender Female
Patreon Month 2024-11 Daughters of the Burning Rose Flight
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

The Archangel - the final and highest possible rank in the Order of the Burning Rose. On the battlefield the archangel is righteous fury made manifest. Borne on four enormous feathered wings, and wielding either a flaming holy avenger's sword, or heart piercing spear.

This is a 3D-printed resin product.

 

Kit includes:

  • 1 Arch Angel Upper Body
  • 1 Arch Angel Legs
  • 1 Arch Angel Left Arm
  • 1 Arch Angel Right Arm [Open Wrist]
  • 1 Arch Angel Shoulder Pad
  • 1 Arch Angel Backpack
  • 4 Arch Angel Wings

 

  • 1 Arch Angel Flaming Sword held in hand (right) [Open Wrist]
  • 1 pair of Arch Angel Arms with Spear

One of the Characters from our Daughters of the Burning Rose range of gothic medieval-themed warrior women, suitable for use in sci-fi and fantasy tabletop gaming and TTRPG.

 

 Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Fantasy
Medium/ Material 3D Printed Photopolymer
Style / Theme Renaissance
Gender Female
Patreon Month 2024-11 Daughters of the Burning Rose Flight
Product tags
Blog posts about this product
DBR Flying Infantry Giveaway
The giveaway features 21 unique pre-assembled female DBR Flying Infantry miniatures that we constructed as examples for this month's digital and physical release! The prize contains: 2 x Arch Angel Characters 2 x Lightning Mage Characters 2 x Blacksmith Characters 10 x Burning Rose Assault Flight Infantry 5 x Burning Rose Pistolier Flight Infantry In all worth over £89!!