You have no items in your shopping cart.

Burning Rose Pistolier Flight (5 miniatures)

Lead time est. 2 weeks
£23.00
SKU: 00-3DP-FBR-PIST
*
Show All Options keyboard_arrow_down
  • Feathered Wings [+£3.00]
    Feathered Wings [+£3.00]
*
Show All Options keyboard_arrow_down
  • Arming Sword [+£1.72]
    Arming Sword [+£1.72]
  • Bearded Axe [+£3.00]
    Bearded Axe [+£3.00]
  • War Hammer [+£3.00]
    War Hammer [+£3.00]
  • Spear [+£3.00]
    Spear [+£3.00]
Show All Options keyboard_arrow_down
  • Eagle Pads [+£1.84]
    Eagle Pads [+£1.84]
  • Single Curve Gothic [+£1.84]
    Single Curve Gothic [+£1.84]
  • Renaissance Pauldrons [+£1.84]
    Renaissance Pauldrons [+£1.84]
  • Plate Armour Pauldrons [+£1.84]
    Plate Armour Pauldrons [+£1.84]
Show All Options keyboard_arrow_down
  • Burning Rose Unhelmeted Heads [+£6.30]
    Burning Rose Unhelmeted Heads [+£6.30]
*
*

Current estimated lead time: 4 weeks

Please check the box to confirm you understand the following and have read the product description.

+ -

Clad in armour, ornamented with stylised wings and banded gothic plates, the core of the airborne infantry blaze across the battlefield like avenging angels. The Pistoliers outflank and out manoeuvre their opponents, launching lightning fast hit-and-run strikes with terrifying ranged weapons, burning and blasting their foes apart, whilst gracefully soaring overhead, as if unbound by gravity.

This is a 3D-printed resin product.

Kit includes:

  • 7 Sci-Fi Helmets (5 with visor closed, 2 with visor open)
  • 5 Daughters of the Burning Rose Flying Bodies
  • 5 pairs of Daughters of the Burning Rose Open Wrist arms (5 left, 5 right)
  • 5 Daughters of the Burning Rose Jetpacks
  • 5 pairs of Wings or Jetpack Thrusters
  • 5 pieces of basing rubble

 

  • 10 Heavy Arquebus Pistols held in hand (5 left, 5 right) [Open Wrist]
  • 2 Flame Pistols held in hand (1 left, 1 right) [Open Wrist]
  • 2 Phosphor Pistols held in hand (1 left, 1 right) [Open Wrist]

The neck joints of these models are compatible with our resin Regiments heads and helmets.
The arm joints of these models are compatible with our Female resin Regiments arms.
The weapons / arms are compatible with our resin Open Wrist joint weapons / arms.

 Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Not a toy.

Not a toy.
Nije igračka.
Není to hračka.
Ikke et legetøj.
Geen speelgoed.
Ei ole mänguasi.
Ei lelu.
Pas un jouet.
Kein Spielzeug.
Όχι ένα παιχνίδι.
Nem játék.
Ní bréagán.
Non è un giocattolo.
Nav rotaļlieta.
Ne žaislas.
Mhux ġugarell.
Ikke et leketøy.
To nie jest zabawka.
Não é um brinquedo.
Nu o jucărie.
Ni igrača.
No es un juguete.
Inte en leksak.
Не е играчка.
Net e Spillsaach.

 

Product info


Please read the full product safety information and instructions here: https://anvilindustry.co.uk/product-info

 

 

General Safety Warnings


Anvil Industry products are miniature-scale collectibles, they are not toys, and are only suitable for adults.

They should be kept out of reach of children as small parts may be sharp or a choking hazard.

All packaging should be kept out of reach of children due to the risk of choking or suffocation.

Packaging should be disposed of in accordance with local legislation: Cardboard boxes and paper tape are recylable, void fill is startch based and compostable, gripseal bags are made from Polythene (LDPE) and are reusable and recyleable (please check with your local facility).


Product Materials

 

Polyurethane Polymer (referred to as “Resin” or “Cast Resin”)

This material applies to all product SKUs, excluding the ones listed here which are made of other materials (16-C-10 - Magnet Pack, 09-C-7 - Regiments Magnet Pack, All SKUs beginning with “BASE”, All SKUs beginning with “00-3DP”, All SKU's begining with "DF" or "ADF").

Products manufactured in the UK by Anvil Industry, using raw materials from the EU.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


Photopolymer (referred to as “Resin” or “Printed Resin” or “3D Printed”)

This material applies to all SKUs beginning with “00-3DP”.

Products manufactured in the UK by Anvil Industry, using raw materials from China.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


ABS Thermoplastic (referred to as “plastic”)

This material applies to all SKUs beginning with “BASE”.

Products manufactured in the EU by a supplier.

Appearance is black in colour, hard and slightly flexible.

Material is non-hazourdous at room temperature, as shipped to customer.

Material is recyclable along with other ABS plastics.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Fantasy
Medium/ Material 3D Printed Photopolymer
Style / Theme Renaissance
Patreon Month 2024-11 Daughters of the Burning Rose Flight
Gender Female
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

Clad in armour, ornamented with stylised wings and banded gothic plates, the core of the airborne infantry blaze across the battlefield like avenging angels. The Pistoliers outflank and out manoeuvre their opponents, launching lightning fast hit-and-run strikes with terrifying ranged weapons, burning and blasting their foes apart, whilst gracefully soaring overhead, as if unbound by gravity.

This is a 3D-printed resin product.

Kit includes:

  • 7 Sci-Fi Helmets (5 with visor closed, 2 with visor open)
  • 5 Daughters of the Burning Rose Flying Bodies
  • 5 pairs of Daughters of the Burning Rose Open Wrist arms (5 left, 5 right)
  • 5 Daughters of the Burning Rose Jetpacks
  • 5 pairs of Wings or Jetpack Thrusters
  • 5 pieces of basing rubble

 

  • 10 Heavy Arquebus Pistols held in hand (5 left, 5 right) [Open Wrist]
  • 2 Flame Pistols held in hand (1 left, 1 right) [Open Wrist]
  • 2 Phosphor Pistols held in hand (1 left, 1 right) [Open Wrist]

The neck joints of these models are compatible with our resin Regiments heads and helmets.
The arm joints of these models are compatible with our Female resin Regiments arms.
The weapons / arms are compatible with our resin Open Wrist joint weapons / arms.

 Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Fantasy
Medium/ Material 3D Printed Photopolymer
Style / Theme Renaissance
Patreon Month 2024-11 Daughters of the Burning Rose Flight
Gender Female
Product tags
Blog posts about this product
DBR Flying Infantry Giveaway
The giveaway features 21 unique pre-assembled female DBR Flying Infantry miniatures that we constructed as examples for this month's digital and physical release! The prize contains: 2 x Arch Angel Characters 2 x Lightning Mage Characters 2 x Blacksmith Characters 10 x Burning Rose Assault Flight Infantry 5 x Burning Rose Pistolier Flight Infantry In all worth over £89!!