You have no items in your shopping cart.

Sorry - this product is no longer available

Bare Rifle Arms - Five Pairs

£3.45
SKU: A-A-B-R
+ -

A Sprue of  five (5) pairs of Bare Steam Lord Rifle arms, designed for use with our Assault rifles/carbines.

 

Assembly Notes

 

  • To attain maximum realism these arms are sculpted with the stock held properly in the shoulder, this means that assembling the arms correctly requires a little skill, please take a minute or two to read the following assembly notes-
  • We strongly recomend that the parts be dry fitted together with blue-tac to check for alignment.
  • We've found it easiest to glue the right arm on first, then blue tack the left arm in place and glue the rifle to the right arm, checking it sits correctly in the left hand and lines up right, then once the gun is secure, remove the left arm and glue it back in place.
  • Each pair is different and will need matching up correctly. The inside arm has a number of dots which corresponds to the number of dots on the matching arm.
  • Three of the pairs require the stock and grip to be removed from the rifle, one pair requires that the stock only be removed, and one pair requires the grip only be removed.

 

Conversion bits designed for use with Exo-Lords, these arms fit with our range of shoulder pads, or also look great used just by themselves without a pad. You can also use these arms with other similarly scaled miniatures.

 

This product is not a toy, it is  supplied unpainted, and will require some preparation and gluing with superglue. For further guidance, the Anvil Industry guide “Working with Resin” can be found at the bottom of the page.

A Sprue of  five (5) pairs of Bare Steam Lord Rifle arms, designed for use with our Assault rifles/carbines.

 

Assembly Notes

 

  • To attain maximum realism these arms are sculpted with the stock held properly in the shoulder, this means that assembling the arms correctly requires a little skill, please take a minute or two to read the following assembly notes-
  • We strongly recomend that the parts be dry fitted together with blue-tac to check for alignment.
  • We've found it easiest to glue the right arm on first, then blue tack the left arm in place and glue the rifle to the right arm, checking it sits correctly in the left hand and lines up right, then once the gun is secure, remove the left arm and glue it back in place.
  • Each pair is different and will need matching up correctly. The inside arm has a number of dots which corresponds to the number of dots on the matching arm.
  • Three of the pairs require the stock and grip to be removed from the rifle, one pair requires that the stock only be removed, and one pair requires the grip only be removed.

 

Conversion bits designed for use with Exo-Lords, these arms fit with our range of shoulder pads, or also look great used just by themselves without a pad. You can also use these arms with other similarly scaled miniatures.

 

This product is not a toy, it is  supplied unpainted, and will require some preparation and gluing with superglue. For further guidance, the Anvil Industry guide “Working with Resin” can be found at the bottom of the page.